« Back to product
Richard And Judy W.
I have the 10,000 lb on a Jeep Wrangler, how do I turn the wench light off?
To turn off the integrated LED logo light on the Quadratec RES-Q Teton Series Winch, it is wired directly into your vehicle's ignition or accessory power (typically tapped into a running light or auxiliary switch source so it illuminates when the vehicle is on).
Because it doesn't have an independent on/off toggle switch built directly into the winch housing or wireless remote itself, to turn it off completely, you will need to check how the installer tapped the small positive power wire coming off the winch control box:
If it's wired to an Aux Switch (like factory Upfitter switches): You can simply turn off the assigned auxiliary switch in your cab.
If it's wired into your Parking Lights / DRLs: It will stay lit whenever your headlights or running lights are on, unless you disconnect or put a dedicated inline toggle switch on that specific positive trigger wire leading to the solenoid box.
Because it doesn't have an independent on/off toggle switch built directly into the winch housing or wireless remote itself, to turn it off completely, you will need to check how the installer tapped the small positive power wire coming off the winch control box:
If it's wired to an Aux Switch (like factory Upfitter switches): You can simply turn off the assigned auxiliary switch in your cab.
If it's wired into your Parking Lights / DRLs: It will stay lit whenever your headlights or running lights are on, unless you disconnect or put a dedicated inline toggle switch on that specific positive trigger wire leading to the solenoid box.
James H.
I bought the Quadratec RES-Q Teton Series Winch 10,000 lbs with Synthetic Rope. What is the gauge of the battery cables supplied?
The Quadratec RES-Q Teton Series Winch 10,000 lbs is supplied with 2-gauge (2 AWG) battery cables. These cables are typically provided in 6-foot lengths to connect the integrated solenoid to your vehicle's battery.
Jay S.
Do you sell the remotes for this separately?
Yes, please call customer service at 1-800-745-5337 for assistance placing an order for the replacement.
Kristi C.
I have this winch Item no: 92128-1001 and this bumper Item no: 12056-1102
And I can't figure out what license plate holder will work. Most photos on the winch page do not have front license plates but it's required in my state. Thanks.
This license plate bracket is a great option because it flips up for access to the winch line: DV8 Offroad Fairlead Mounted Flip-Up License Plate Bracket
Todd S.
This winch states free Recovery kit but in cart I am being charged for it? Quadratec RES-Q Teton Series Winch 10,000 lbs with Synthetic Rope & Rope Style Recovery Kit
Please call customer service at 1-800-745-5337 for assistance with placing your order.
Russell B.
Does this work seamlessly with the Quadratec QRC Front Winch Ready Bumper for 18-24 Jeep Wrangler JL?
Yes, it does.
Jon D.
I have a 2106 2 dr Jeep Wrangler 75th anniversary edition - will this winch fit my stock bumper?
Yes, it will.
Paul W.
Duty cycle
Winch slow and steady for a period not to exceed 60 - 90 seconds per pull. Exceeding 90 second pulls will place a strain on your electrical system and the winch. Taking a short break in-between 60 second pulls allows the battery to recharge itself and therefore provide the maximum pulling power.
Danny C.
Does the fairlead bolt directly to the winch?
No, the fairlead will mount onto the fairlead mounting bracket of the bumper.
Craig T.
Will the 10k version fit on the Quadratec QRC full-size front bumper for a 2021 JL Sport Unlimited? Thanks!
Yes, it will. Thank you for your inquiy.