Reviews for Quadratec LED Tail Light Kit for 97-06 Jeep Wrangler TJ
really nice lights very bright.
I am very happy with the Quadratec tail lights. There was an issue with the flasher that came with the order in that it would not always flash at the same frequency. It would slow down for a flash or two every so often when the turn signal was on. I contacted Customer Service and they told me there was an issue with that flasher and are sending me a different one that they said is more reliable at no charge and via next day air delivery. Not only am I happy with the tail lights, I am also very happy with the outstanding Customer Service and Quadratec's commitment to stand behind their product!
Product was exactly as promised. Real upgrade from the traditional incandescent. Very bright and clear. Would highly recommend. Great value for dollar here. Not sure the previous reviewers issue with wiring slack. Just remove the inner plate during install and wire length is no issue. Only an “issue” at all on drivers side.
Took 1 hour to install only because you have to struggle passing the wire connector on the passenger side in the wheel well. I have a phot of OEM on drivers side and LED on passenger side. BIG difference in brightness.
Great lights! One note, these will not power up until they are properly grounded via the three bolts -- took me a bit to realize this. Very bright and clean light. Installation was rather straightforward. Install new relay module, pop old assemblies off, put new ones on, test, done. Very nice update to anyone withg the old incandescent bulbs that came stock. The new assembly looks very similar to the stock one, so if you dig that look, you are going to be very pleased. You will need a 3/8" socket, a philips screwdriver, and about 30m of time to install this.
Wanted LED tail lights for safety reasons (other drivers) ... these lights are very bright. The reverse lights are super bright too. And the left lens does light up the OE rear license plate when lights are on.
These do not feel as sturdy as the originals - but perhaps they don't need to be. And I could not use my light guards with these - these new lights are just too deep.
Installation was a breeze and the relay was easy to replace as well. Overall very happy with these lights.
Just installed these on my 04 Wrangler TJ Sport. Love the way they look and act! Really updates my TJ. Couldn’t be happier.
Just a couple of helpful notes:
1. These will not power up at all until they are grounded to the Jeep via the three bolts.
2. Keep pulling (not too much though) and digging for the connector on the passenger side. It IS in there BUT it gets stuck in between the body of the Jeep. I had to go up underneath and nudge it along with a long screw driver. This process alone doubled my installation time, but all worth it in the end.
3. Be sure to lubricate the three bolts and holes before installing your new lights. You are going to want/need to tighten them down by hand as much as possible. Especially on the driver’s side. You’ll see why when you do it. Don’t delay...get these and enjoy!
2005 TJ. Love these lights. Super bright. Installation was super easy and was plug and play. Well worth the money.
Although these are plug and play and pretty simple to install the driver's side took a little longer since I had to unscrew the internal license plate light to get the bottom bolts in and tightened. It only took about 10 minutes but I think it's worth mentioning. I couldn't get my tail light guards mounted with these lights but the extra light makes it worth it, as long as I don't hit a tree or a rock and break the light.
2004 TJ...I bought these to replace the factory taillight setup. And these are FANTASTIC! Very bright, super easy to install for anyone that can read a direction, and I can actually see at night when I'm in reverse because that light is so bright! Definitely worth the investment. Thanks, Quadratec!