« Back to product
Edwin O.
I have a stock '99 XJ with no lift kit installed. What size shocks would I need?
You need the shocks for 0-1.5" lift height.
ALVIN O.
replacing shocks on my 1999 jeep wrangler I don't know what lift it has on it but the shocks measure
Front 14 1/2 - 24 1/8
rear 14 13/16 - 24 7/8. would these work or do you have some that would work
Based on your measurements you have 3.5-4 inches of lift. Part# 16116.0412.14 would be the appropriate shock kit.
Dominic R.
Will these fit my 99 xj with 3.5 lift
Yes these will fit your Jeep. Thank you for your question.
Ben R.
Would I need springs if I wanted to go from stock shocks to 2-3" shocks?
Yes the extended shocks would be too long without the corresponding springs
Lenice S.
Are these Gas Shocks?
No these are hydraulic fluid shocks. The gas shocks (Nitro) are here : https://www.quadratec.com/p/quadratec/maximum-duty-nitro-80-shock-kit-97-06-jeep-wrangler-tj
Blake G.
Do these come with the boots?
Yes, they do
Travis W.
What are the actual dimensions on each set compressed and extended?
For 0” to 1.5” Lifts:
Front Extended: 22.30”
Front Collapsed: 13.52”
Rear Extended: 19.32”
Rear Collapsed: 12.01”
For 2” to 3” Lifts:
Front Extended: 22.30”
Front Collapsed: 13.52”
Rear Extended: 22.71”
Rear Collapsed: 13.93”
For 3.5” to 4” Lifts:
Front Extended: 24.30”
Front Collapsed: 14.52”
Rear Extended: 24.94”
Rear Collapsed: 14.91”
For 6” to 8” Lifts:
Front Extended: 27.80”
Front Collapsed: 16.27”
Rear Extended: 27.33”
Rear Collapsed: 16.05”