Every year, when the seasons change, it’s time to switch from your hardtop to a soft top. This is every Wrangler owner’s least favorite part of owning a Jeep. Instead of dreading the switch, make it a breeze with the Lange Originals Crank Hoist-A-Top. Without the use of a hardtop hoist, it takes multiple people to remove a Jeep hardtop. However, with the assistance of one of Lange Original’s Hoist-A-Tops you can easily take the top off your Wrangler JL alone. The balanced steel frame easily lifts and stores factory and aftermarket hardtops. With rubber coated hooks, you do not need to worry about damaging or modifying your hardtop. Lange Original’s rear Smart Hook™ ensures that the rear lift gate glass stays closed and out of the way for storage.
Minimum Ceiling Height: 7’
Maximum Ceiling Height: 20’
Stores and Protects: The Crank Hoist-A-Top from Lange Originals features rubber coated hooks and foam padding to avoid marring or scratching the finish of your expensive factory or aftermarket hardtop. Unlike other lifts, the Hoist-A-Top can be used to store your top up in the air, and out of the way.
User Friendly and Versatile: The included manual crank winch makes hardtop removal a piece of cake. Simply crank the top off your Wrangler, and drive away. This is kit is compatible with any garage, carport, barn, or shed with between 7’ and 20’ ceilings.
- Electric Drill with 3/8" Bit
- Phillips Screw Driver
- Adjustable Wrench
- Measuring Tape
- Manual Crank Winch
- Installation Hardware
- : Manual Hoist
Jeep Wrangler 2-Door (JL)
- 2020 Jeep Wrangler 2-Door (JL)
- 2019 Jeep Wrangler 2-Door (JL)
- 2018 Jeep Wrangler 2-Door (JL)
Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
Lange Originals Crank Hoist-a-Top Options
|Part Number||Catalog #||Options||Price|
Customer Submitted Photos
Lange Originals Crank Hoist-a-Top Reviews
Exactly what I needed to put my top on/off by myself. I noticed one comment that mentioned the lift moves too slow. Well, it uses a worm gear so you don't have that obnoxious ratcheting sound like you do with boat trailer winches. I left off the handle, jammed the nylok nut in place and used a 19mm socket with my cordless drill. Works great!
Product works as advertised. Screws suck. You need to purchase your own better quality screws. Had to watch three different YouTube videos to install. Also, make sure to use WD-40 on the winch/crank.
Great product that makes it easy to take off and remove the top.