Rough Country 900.20 4in Suspension Lift Kit for 93-98 Jeep Grand Cherokee ZJ
Many states have laws that limit the maximum height of a lifted vehicle. Never exceed the legal height limit.
N3 Premium Shocks: Rough Country’s N3 shocks provide smooth performance with nitrogen-charged 10-stage variable valving. They are designed to provide a comfortable on-road ride, while improving off-road damping.
Driveline Geometry: To optimize driveline geometry and suspension angles, Rough Country includes fixed length front lower control arms and upper and lower rear arms. This combination maintains correct pinion and dive shaft angles for a smoother ride. Models equipped with a CV front driveshaft may cause driveline vibrations.
Run Larger Wheels and Tires: By adding additional clearance, the Rough Country 4in Suspension Lift Kit allows you to run up to 31x10.50 tires on your Jeep Grand Cherokee ZJ.
Level 3Advanced- Front Coil Spring Pair
- Rear Coil Spring Pair
- Front N3 Shock Pair
- Rear N3 Shock Pair
- Front Lower Control Arm Pair
- Rear Upper Control Arm Pair
- Rear Lower Control Arm Pair
- Front Sway Bar End Links
- Rear Sway Bar Brackets
- Rear Track Bar Bracket
- Front Bump Stop Extensions
- Rear Bump Stop Brackets
- Rear Brake Line Brackets
- Installation Hardware
- Features: Short Arm
- Shocks Included: With Shocks
- Max Tire Size: 31
- Included Parts: Brake Line Brackets, Bump Stop Extensions, Coil Springs, Front Lower Control Arms, Hardware, Rear Lower Control Arms, Rear Track Bar Bracket, Rear Upper Control Arms, Sway Bar Endlinks
- Shipping Weight: 127lb
Jeep Grand Cherokee (ZJ)
- 1998 Jeep Grand Cherokee (ZJ)
- 1997 Jeep Grand Cherokee (ZJ)
- 1996 Jeep Grand Cherokee (ZJ)
- 1995 Jeep Grand Cherokee (ZJ)
- 1994 Jeep Grand Cherokee (ZJ)
- 1993 Jeep Grand Cherokee (ZJ)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Rough Country 4in Suspension Lift Kit Reviews
Looks nice
So far so good, everything is here. I really like how heavy duty these control arms are massive! Solid built is an understatement, will be installing on my 94 v8 ZJ
Probably the best you can get for the money. Installation was pretty straight forward, very little "modifications" to the parts necessary.
Be sure to open all the boxes and verify you have all the parts when you get it, had to call and get some bushings that were missing from the kit sent to me which set me back a couple days. Quadretec took care of me though.
Kit says you can fit up to 31s, but I have went with 33s and it works fine if you don't mind some rubbing. Doing some fender mods will definitely get rid of rubbing easily, but I'm not too worried about it.
