Improved Power Efficiency: The Gen3 has a 7.0 HP motor with 12% average line speed increase and a whopping 17% faster spool speed with zero load.
Nighttime Capable: The remote controller has a built in flashlight to equip you with vision for nighttime recovery needs.
Load Indicator: Exclusive to the XRC GEN3, constantly provides information on winch load via a series of LEDs on the remote, preventing overtaxation of the motor and line, and damage from overload.
Remote Features: The controller sports a brand new ergonomic handle, flashlight, and dual magnet mounts for easy placement.
High Visual Clutch Lever: A easily identifiable clutch lever helps by communicating ENGAGED vs FREE SPOOL at a second’s glance.
Detachable Body Armor: Detachable body armor can be painted to give you a custom look.
Forged Gearing: The XRC GEN3 gearing is forged steel instead of stamped steel, allowing the winch to pull more load at a faster speed without sacrificing durability.
Additional 12V Items Compatible: XRC GEN3 comes equipped with a 12V power post for additional accessories up to 50 amps.
Cable Feet: 94 Feet
Waterproof Rating: IP67
Rated Line Pull: 9500lbs.
Faster Line Speed(respooling at 0): 27.3 feet per minute.
Faster Line Speed at Load (6000lb, ft/min): 12.8 feet per minute.
Motor AMP Draw at Load (6000lb): 280 amps & 385 amps at 9500lbs.
The COMP Series Difference: Synthetic Winch Rope is 1/7th the weight of steel cable –no kinks, curls or wire splinter.
COMP Series Aluminum Fairlead: Reduces binding and friction caused by angled pulls and will not fray or tangle your synthetic winch rope. Protects synthetic rope from excessive wear. UV and abrasion resistant rope, specially coated to prevent slippage.
- XRC GEN3 Winch
- Forged Winch Hook
- Hawse or Roller Fairlead(choose accordingly)
- Steel or Synthetic Cable (choose accordingly)
- Detachable Body Armor
- Remote
- Moveable Control Box
- Instructions
- Line Length: 94 ft or 80 ft
- Line Pull: 9,500 lbs or 12,000 lbs
- Max Line Speed: 27 ft/min or 25 ft/min
- Current Draw: 385 amps or 375 amps
- Intended Usage: Occasional
- Solenoid: Remote
- Line Type: Synthetic Rope
- Remote: Wired
Smittybilt XRC GEN3 Winch Options
| Part Number | Catalog # | 9500lb/12000lb Wire Cable or Synthetic Rope | Price | ||||||
|---|---|---|---|---|---|---|---|---|---|
| SB98695 | 92122-1214 | 9500lb Competition Synthetic Rope Winch with Hawse Fairlead | $719.99 | ||||||
| SB98612 | 92122-1215 | 12000 lbs Competition Synthetic Rope Winch with Hawse Fairlead | $863.99 |
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Smittybilt XRC GEN3 Winch Reviews
Install was easy, hard part was trying to figure out where to wire the led light on the box.
GREAT BUY FROM QUADRATEC!..SAFE SYNTHETIC ROPE AND LIGHT WEIGHT WITH THE ROPE ON IT MAKING IT A FIRST CHOICE FOR JEEPS! INSTRUCTIONS ON WIRING IT UP WORKED GREAT
Synthetic line, control features, load indicator
Questions

Because you have a JL 392 with the factory steel bumper, mounting a 12,000 lb winch requires a specific setup:
OEM Winch Mounting Plate / Brackets: The factory steel bumper on the JL/Rubicon 392 is winch-capable out of the box, but you need the internal Mopar Winch Mounting Bracket Kit (often sold as part of the Mopar steel bumper winch installation kit, such as part number 82215528AB or equivalent JL steel bumper hardware) to anchor the winch securely to the frame rails hidden inside the bumper shell.
Fairlead Plate / Center Plate: Depending on the kit, you will need the matching front faceplate/fairlead mount so your synthetic line and hawse fairlead sit flush through the bumper's pre-cut opening.
License Plate Relocation Bracket: If you run a front license plate (required in Nevada), you'll need a flip-up or off-center bracket that mounts to your fairlead so the plate doesn't block the winch.






































