Quadratec Smittybilt Front XRC Bumper in Textured Black with Q9000 Self Recovery Winch in Black for 87-95 Jeep Wrangler YJ

XRC Front Bumper
The new XRC Bumper line was engineered to provide increased clearance for rock crawling. Each bumper has high degree approach angles and raised corners to maximize ground clearance. Each bumper is manufactured from 3/16" cold rolled steel and then robotically welded to the exact specifications. All the welds are ground down and smoothed out and then a two stage powder coat is applied for the ultimate look. The textured matte powder coat finish offers a truly custom look! The front stinger is manufactured from 1.75 tubing and has two light tabs that can accommodate up to two 9" lights. Your winching needs are also met as each bumper comes with an integrated winch plate.

Q9000 Winch
Introducing the first winch designed and engineered specifically for your Jeep®. All Quadratec Winches are manufactured in our state of the art ISO 9001 factory and are CE certified for our international customers. The Q9000 provides all of the capability that most enthusiasts will ever need for occasional use on their Wranglers and CJs. Now you can take advantage of Quadratec's massive purchasing power to get the lowest price of any winch in this class. Our engineers work directly with the factory to provide solutions which are specifically tailored to your Jeep®. Our powerful 4.8hp series wound motor and class leading low gear ratios give fast line speed with a Battery Friendly low current draw. You will get the most winching time from your available state of battery charge. We give you an industry best Limited Lifetime Warranty on mechanical parts and a 1 year Warranty on all electrical components. Detailed installation instructions and a handy glove compartment sized Owners Manual with Winching Guide are included.
All Q Series Winches include two sets of solenoid brackets for side mounting or top mounting.
Q-Series Self-Recovery Winch Warranty

Ramsey Superwinch T-Max Model Q9000 Rep 8.5e LP 8500 EW-8500 Capacity 9000 lbs 8500 lbs 8500 lbs 8500 lbs Warranty LL/1Y LL/1Y 2Y 3Y/1Y Gear Reduction to 1*** 212 294 235 172 Cable Diameter .375 .313 .313 .328 Cable Length 100' 95' 94' 94' Line Speed fpm @ 8000#** 8.6 4.5 3.5* 8.2 Motor Draw @ 8000#** 300 Amps 335 Amps 320 Amps 410 Amps Price $299.99 $529.99 $399.99 $349.99 Best in Class Score 7 2 0 0

*Rated at 8500#       **First Layer of Cable
LL= Limited Lifetime         Y= Year
*** Gear Reduction to 1, otherwise known as the "Gear Ratio". A higher numerically gear ratio will provide slower and more powerful pulling while also providing the least amount of amp draw on your battery because the winch motor doesn't need to try as hard. A lower numerically gear ratio will pull faster but also put more amp draw on your battery.

Features Included:
1 Hefty Clutch Control
2 Case Hardened Input Gears To HRC 30-38*
3 Case Hardened Intermediate Gears To HRC 43-48*
4 Case Hardened Output Gears To HRC 43-48*
5 Stainless Steel Hardware Throughout
6 Case Hardened Hex Drive Shaft To HRC 38-42*
7 Load Holding Brake System
8 Winch Drum is Case Hardened To HRC 55-58*
9 High Strength Aluminum Tie Bars
10 Shaft Coupler is Case Hardened To HRC 30-38*
11 Solid Copper and Brass Power Terminals
12 Durable Powder Coat Finish
13 Powerful 4.8 Horsepower Series Wound Motor
14 Heavy Duty Solenoid with 2 Bracket Locations
15 Galvanized Aircraft Cable 100' x 3/8"
16 Stainless Steel Safety Latch
17 Forged Steel Clevis Hook
18 Nylon Safety Hook Strap
19 High Visibility Rubberized Winch Remote with 12' Cord
20 Solid Copper Battery Cables
21 Zinc Plated Roller Fairlead
* Rockwell Hardness.

Installation Notes

Installation Difficulty:

Level 2Intermediate

Installation Time: 3-4 hours

Parts Included

Front Bumper
Q9000 Winch
Zinc Plated Roller Fairlead
100' x 3/8" Aircraft Cable
Forged Steel Clevis Hook
Nylon Safety Hook Strap
12' Wire Remote Control
Remote Solenoid Box
Motor Mounted Solenoid Box Mount
Center Mounted Solenoid Box Mounts
Installation Hardware