Home » Jeep Bumpers, Towing, Racks » Cargo Racks & Accessories » Roof Racks » Kargo Master 5030-1 Congo Cage for 76-95 Jeep® CJ-7 & Wrangler YJ

Kargo Master 5030-1 Congo Cage for 76-95 Jeep® CJ-7 & Wrangler YJ

Catalog #: 12138.001
Kargo Master Part #: 5030-1
Unmatched quality, high-tech design and superior durability. The Congo Cage features easy installation with common tools.The high-strength steel Congo Cage is constructed from round 1.625” diameter tubing and can support up to 500 pounds. Hinged rear mounts & easy-release front mounts provide convenient soft top removal and installation. Great for hauling canoes, kayaks, lumber and pipes when used with the optional Congo Cage Utility Crossbars. Supertough black polyester powder coat finish provides lasting protection.

Wrangler owners with a load to carry, rejoice! Finally a reasonably priced Jeep rack that is strong enough to get the job done. The Congo Cage provides a rock solid foundation for Kargo Master Safari Racks, Jeep Rack Utility Crossbars, Yakima and Thule bars, and a host of other cargo management devices. The perfect Jeep roof rack to carry canoes, kayaks, surfboards, snowboards, and other tools of the trade.Bigger Tubes-Stronger Frame

  • Big 1.625" Diameter x .083" Steel Tube Is The Strongest Available
  • 500 Lb. Cargo Capacity
  • Nationwide Lifetime Frame Warranty
  • Clean 4" Swaged Joints Double Tube Thickness At Stress Points
  • Yellow Zinc Plated Grade 5 Fasteners For Added Strength And Corrosion ResistancePremium Powdercoat Finish
  • THIS IS HUGE!!!!!! All Jeep racks and SUV roof racks are NOW either Yellow Zinc Chromate Plated or Zinc Epoxy Primed beneath a marine grade powder coat finish that is specially formulated to resist corrosion and abrasion. THIS IS THE MOST RUST RESISTANT FINISH IN THE INDUSTRY.
  • Will not fade or dullOther Cool Features
  • Unique front and rear mount brackets use existing windshield hinge and tail light holes. Drilling not required.
  • Jeep rack removes easily with 4 bolts
  • Hinged rear brackets allow installation/removal of Jeep hard or soft top without removing Jeep rack.
  • Unique indented top rails reduce overall vehicle height and make it easier to load/unload cargo.
  • Accessory brackets available to mount our Jeep Rack Utility Crossbars or Yakima CrossbarsKargo Master Assembly & Mounting for Safari Rack on Congo Cage is required for mounting Bushman Steel Racks to Congo Cage.
Installation Notes
Installation Difficulty:
Level 3Advanced

Drilling required.

Tools Needed:
Power Drill
5/16" drill bit

Installation Time: 2-4 hours
Parts Included

Two Cross Tubes
Front "U" Bar
Front Legs
Front Mount Plates
Rear "U" Bar
Rear Legs
Rear Leg Mount Plates
Two 1/2" x 3/4" Hex Bolts
Two 1/2" Lock Washers
Two 1/2" SAE Flat Washers
Two 5/16" x 5" Hex Bolts
Two 5/16" x 1 1/4" Hex Bolts
12 5/16" Nyloc Nuts
Ten 5/16" Flat Washers
Eight 5/16" x 2" Button Head Bolts
Six 1/4" x 20 x 1" Thread Cutting Screws
Six 1/4" Lock Washers
Six 1/4" SAE Flat Washers
Eight 5/16"-18 x 1" Flat Head Allen Bolts
Two 5/16"-18 x 1" Button Head Bolts
Two 5/16" Lock Washers

  • Features: Steel
  • Color: Black
  • Jeep Wrangler (YJ)

  • 1995 Jeep Wrangler (YJ)
  • 1994 Jeep Wrangler (YJ)
  • 1993 Jeep Wrangler (YJ)
  • 1992 Jeep Wrangler (YJ)
  • 1991 Jeep Wrangler (YJ)
  • 1990 Jeep Wrangler (YJ)
  • 1989 Jeep Wrangler (YJ)
  • 1988 Jeep Wrangler (YJ)
  • 1987 Jeep Wrangler (YJ)
  • Jeep CJ-7

  • 1986 Jeep CJ-7
  • 1985 Jeep CJ-7
  • 1984 Jeep CJ-7
  • 1983 Jeep CJ-7
  • 1982 Jeep CJ-7
  • 1981 Jeep CJ-7
  • 1980 Jeep CJ-7
  • 1979 Jeep CJ-7
  • 1978 Jeep CJ-7
  • 1977 Jeep CJ-7
  • 1976 Jeep CJ-7
Share Your Thoughts
Review Summary
Shared Media