Home » Jeep Lift Kits & Suspension » Lift Kits » Spring Lift Kits » Fabtech 5" Crawler System with Performance Shocks for 07-11 Jeep® Wrangler Unlimited JK 4 Door
Fabtech 5" Crawler System with Performance Shocks is no longer available
Here are some similar items you might be interested in

Fabtech 5" Crawler System with Performance Shocks for 07-11 Jeep® Wrangler Unlimited JK 4 Door

For JK owners that require the ultimate in offroad performance Fabtech offers a 5” Crawler system that will allow use of 37” tall tires for aggressive offroad use. The front system features a conversion from the factory 4 link arms to our proven Radius Arm design. The adjustable Radius Arm links are constructed of 5/16” thick steel for maximum dent resistance with rotational urethane joints at each end for unrestricted articulation. These new Radius Arms mount to a 1/4” thick steel crossmember that bolts to the frame under the transmission.

These Kits Also Included Front and Rear Driveshafts for an easy and complete installation.

Check out the optional AEV ProCAL Module, a great finishing touch to any lift kit as it can reprogram your vehicles computer compensating for gear ratio and tire size changes after lift kit installation not to mention many other additional features.

The front steering geometry is relocated via a dropped pitman arm. A Trac Bar relocation bracket keeps the arc of travel between the Trac Bar and Drag Link proper to reduce bump steer throughout the suspension travel.
Lift is accomplished with replacement coil springs or a Coilover Conversion system with Dirt Logic 2.5 Coilovers for maximum performance both on and offroad.
The rear system retains the factory 5 Link design but with extended length lower tubular arms that bolt to new side frame brackets. Installation of these frame brackets does not require the removal of the gas tank or welding. The upper links are replaced as well with a tubular style in the factory mounts. Both upper and lower links feature 5/16”
thick wall links with adjustable rotational urethane ends. The rear Trac Bar is properly relocated to keep the rear axle tracking with the front axle for superior road handling at high speed.
For increased ground clearance at the rear axle, we provide replacement shock mounts that allow trimming of the factory mounts. This allows an
additional 1” of ground clearance over the factory mounts. We offer heavy duty replacement driveshafts to be used with this system for
maximum driveline reliability.

Installation Notes
Installation Difficulty:
Level 4Experts Only

Cutting Required Of OE Frame Lower Control Arm Mounts

Installation Time: 12-16 hours
Parts Included

Front and Rear Driveshafts
Bump Stops
Brake Line Brackets
Sway Bar Links
Pitman Arm
Front Cam Bolts
Front and Rear Coil Springs
Front and Rear Shocks
Long Arm Subframe Assembly
Front Radius Arms
Front Upper Control Arms
Rear Lower Long Arms
Rear Upper Control Arms
Rear Long Arm Frame Mounts
Front and Rear Track Bar Brackets

  • Features: Adjustable Control Arms, Long Arm
  • Shocks Included: With Shocks
  • Max Tire Size: 37
  • Lift Height Range: 5 inch and up
  • Included Parts: Brake Line Extensions, Bump Stop Extensions, Cam Bolts, Front Drive Shaft, Front Lower Control Arms, Front Track Bar Bracket, Front Upper Control Arms, Pitman Arm, Rear Drive Shaft, Rear Lower Control Arms, Rear Track Bar Bracket, Rear Upper Control Arms, Sway Bar Endlinks
  • Jeep Wrangler Unlimited 4-Door (JK)

  • 2011 Jeep Wrangler Unlimited 4-Door (JK)
  • 2010 Jeep Wrangler Unlimited 4-Door (JK)
  • 2009 Jeep Wrangler Unlimited 4-Door (JK)
  • 2008 Jeep Wrangler Unlimited 4-Door (JK)
  • 2007 Jeep Wrangler Unlimited 4-Door (JK)