Ten Factory MG22148 Front 27 Spline Chromoly Axle Kit for 84-06 Jeep Cherokee XJ, Wrangler TJ & TJ Unlimited with Dana 30 Axle
Quadratec Part #:
26125.1007
Ten Factory Part #:
MG22148
Description
Upgrade the front axles on your Jeep Wrangler TJ with the Ten Factory 4340 Chromoly Axle shaft Kit. The Original axles can not handle the abuse of the trails and upgraded tire sizes. The Ten Factory axles are precision forged and heat treated to handle these circumstances with confidence. A high-performance axle that you can rely on. Finished with a black oxide coating including both the left and right front axles. Boasting an exclusive 10 Year Replacement Warranty.
Details
Performance Axle Specifications:
- Dana 30 with 27 Spline inner and outer
- Left Axle Length – 16.5” / Right Axle Length – 32.31” / Axle Stub - 6.11”
- Heat Treated 4340 Chromoly Material for High Strength and Resiliency
- Torque Equalizing Diameters helps eliminate u-joint failure
- Axle Model: Dana 30
- Axle Position: Front
- Features: Chromoly
- Shipping Weight: 40lb
- Shipping Dimensions: 45in x 9in x 4in (L x W x H)
Jeep Cherokee (XJ)
- 2001 Jeep Cherokee (XJ)
- 2000 Jeep Cherokee (XJ)
- 1999 Jeep Cherokee (XJ)
- 1998 Jeep Cherokee (XJ)
- 1997 Jeep Cherokee (XJ)
- 1996 Jeep Cherokee (XJ)
- 1995 Jeep Cherokee (XJ)
- 1994 Jeep Cherokee (XJ)
- 1993 Jeep Cherokee (XJ)
- 1992 Jeep Cherokee (XJ)
- 1991 Jeep Cherokee (XJ)
- 1990 Jeep Cherokee (XJ)
- 1989 Jeep Cherokee (XJ)
- 1988 Jeep Cherokee (XJ)
- 1987 Jeep Cherokee (XJ)
- 1986 Jeep Cherokee (XJ)
- 1985 Jeep Cherokee (XJ)
- 1984 Jeep Cherokee (XJ)
Jeep Wagoneer (XJ)
- 1991 Jeep Wagoneer (XJ)
- 1990 Jeep Wagoneer (XJ)
- 1989 Jeep Wagoneer (XJ)
- 1988 Jeep Wagoneer (XJ)
- 1987 Jeep Wagoneer (XJ)
- 1986 Jeep Wagoneer (XJ)
- 1985 Jeep Wagoneer (XJ)
- 1984 Jeep Wagoneer (XJ)
Jeep Wrangler (TJ)
- 2006 Jeep Wrangler (TJ)
- 2005 Jeep Wrangler (TJ)
- 2004 Jeep Wrangler (TJ)
- 2003 Jeep Wrangler (TJ)
- 2002 Jeep Wrangler (TJ)
- 2001 Jeep Wrangler (TJ)
- 2000 Jeep Wrangler (TJ)
- 1999 Jeep Wrangler (TJ)
- 1998 Jeep Wrangler (TJ)
- 1997 Jeep Wrangler (TJ)
Jeep Wrangler Unlimited (LJ)
- 2006 Jeep Wrangler Unlimited (LJ)
- 2005 Jeep Wrangler Unlimited (LJ)
- 2004 Jeep Wrangler Unlimited (LJ)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Ten Factory Front 27 Spline Chromoly Axle Kit Reviews
Matthew D.
6/5/2020
beautiful fit!! Make sure you buy the plastic sliders so you don't split the seal by the pumpkin when putting them in. Did a frame up re-build and wow impressed with tens factory. I also bought front and rear drive shafts from them and beautiful fit. SOLID
John B.
10/21/2019
No problems with the axles.
Kendrick S.
5/13/2019
Awesome, Part. Preassembled Just slid them in.. one month and they have been preforming great.
Questions
Robert L.
2001 TJ with Dana 30 front and tow package so it has Dana 44 rear. Chromoly front axles by 10 Factory says has 27 splines in and out. I thought the 2001 TJ was 27 inner and 30 outer?
27/27 shafts were used from 87-06 in the Wrangler series Dana 30
Justin S.
What is the maximum tire size I can run without voiding the warranty?
You will need to speak to your specific dealership with regard to warranty questions. I also recommend reading this: https://www.ftc.gov/enforcement/statutes/magnuson-moss-warranty-federal-trade-commission-improvements-act
Adit P.
I ordered this kit and I have no idea what those two unpainted rings are for. Can someone clarify please?
Those are just small dust shields for use in the end of the axle tubes.
