Borgeson 000893 Heavy Duty Replacement Steering Shaft for 84-96 Jeep Cherokee & Wagoneer XJ
Jeep's original steering shaft assembly was not designed for the added stress of body lifts and oversize tires. BORGESON'S replacement assembly has a telescoping shaft with two precision needle bearing u-joints. An upgraded shaft assembly is available that includes a vibration reducer to dampen road shock, similar to the one used in the newer YJ, something the CJ never had. The YJ heavy-duty telescoping shaft assembly is similar to the CJ with two precision needle bearing u-joints and a vibration reducer. A vibration reducer was standard on YJ's. You will notice much more positive and safer steering. Much better, in fact, than the original ever felt.
- Shipping Weight: 6lb
- Shipping Dimensions: 21in x 5in x 3in (L x W x H)
Jeep Cherokee (XJ)
- 1996 Jeep Cherokee (XJ)
- 1995 Jeep Cherokee (XJ)
- 1994 Jeep Cherokee (XJ)
- 1993 Jeep Cherokee (XJ)
- 1992 Jeep Cherokee (XJ)
- 1991 Jeep Cherokee (XJ)
- 1990 Jeep Cherokee (XJ)
- 1989 Jeep Cherokee (XJ)
- 1988 Jeep Cherokee (XJ)
- 1987 Jeep Cherokee (XJ)
- 1986 Jeep Cherokee (XJ)
- 1985 Jeep Cherokee (XJ)
- 1984 Jeep Cherokee (XJ)
Jeep Wagoneer (XJ)
- 1991 Jeep Wagoneer (XJ)
- 1990 Jeep Wagoneer (XJ)
- 1989 Jeep Wagoneer (XJ)
- 1988 Jeep Wagoneer (XJ)
- 1987 Jeep Wagoneer (XJ)
- 1986 Jeep Wagoneer (XJ)
- 1985 Jeep Wagoneer (XJ)
- 1984 Jeep Wagoneer (XJ)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Borgeson Heavy Duty Replacement Steering Shaft Reviews
You talk about beefy! This thing is worth every penny I spent. Comes with a 5 year warranty or 50,000 miles. It is telescoping so install is a breeze. I would also insist you swap out our steering box while your at it because it all has to come out anyway to install this so if you still have your original steering box its time for an upgrade and a new shaft you wont regret it. Only thing that made this difficult to install is the nuts and bolts to tighten are actually a few allen key heads and then a nut to tighten to lock it in. I0 would like the standard nut and bolt method from the stock unit.
