OMIX 17209.01 Fuel Gauge & Temperature Gauge Kit for 55-86 Jeep CJ Series
Quadratec Part #:
917209-01
OMIX Part #:
17209.01
Description
If the level gauges in your Jeep CJ speedometer assembly are worn out and you are holding on for dear life to keep the original odometer and reading, then replace them with the Omix Fuel and Temperature Gauge Set. These gauges fit into the original cluster and attach to the factory wiring with minor revisions, covered in the supplied instructions. Splicing is not required, these gauges have been engineered for better, longer performance over the factory version and rely on an internal resistor system.
Details
Temperature Gauge Readings
- Cold - High Resistance
- Slightly Warm - (130 Deg.) 73 ohms
- Beginning of Band - (171 Deg.) 36 ohms
- End of Band - (242 Deg.) 13 ohms
Fuel Gauge Readings
- Empty - 73 ohms
- 1/2 Tank - 23 ohms
- Full Tank - 10 ohms
- Features: Metal, Plastic
- Color: Black
- Shipping Weight: 0.3lb
- Shipping Dimensions: 7in x 4in x 3in (L x W x H)
Jeep CJ-5
- 1983 Jeep CJ-5
- 1982 Jeep CJ-5
- 1981 Jeep CJ-5
- 1980 Jeep CJ-5
- 1979 Jeep CJ-5
- 1978 Jeep CJ-5
- 1977 Jeep CJ-5
- 1976 Jeep CJ-5
- 1975 Jeep CJ-5
- 1974 Jeep CJ-5
- 1973 Jeep CJ-5
- 1972 Jeep CJ-5
- 1971 Jeep CJ-5
- 1970 Jeep CJ-5
- 1969 Jeep CJ-5
- 1968 Jeep CJ-5
- 1967 Jeep CJ-5
- 1966 Jeep CJ-5
- 1965 Jeep CJ-5
- 1964 Jeep CJ-5
- 1963 Jeep CJ-5
- 1962 Jeep CJ-5
- 1961 Jeep CJ-5
- 1960 Jeep CJ-5
- 1959 Jeep CJ-5
- 1958 Jeep CJ-5
- 1957 Jeep CJ-5
- 1956 Jeep CJ-5
- 1955 Jeep CJ-5
Jeep CJ-6
- 1975 Jeep CJ-6
- 1974 Jeep CJ-6
- 1973 Jeep CJ-6
- 1972 Jeep CJ-6
- 1971 Jeep CJ-6
- 1970 Jeep CJ-6
- 1969 Jeep CJ-6
- 1968 Jeep CJ-6
- 1967 Jeep CJ-6
- 1966 Jeep CJ-6
- 1965 Jeep CJ-6
- 1964 Jeep CJ-6
- 1963 Jeep CJ-6
- 1962 Jeep CJ-6
- 1961 Jeep CJ-6
- 1960 Jeep CJ-6
- 1959 Jeep CJ-6
- 1958 Jeep CJ-6
- 1957 Jeep CJ-6
- 1956 Jeep CJ-6
- 1955 Jeep CJ-6
Jeep CJ-7
- 1986 Jeep CJ-7
- 1985 Jeep CJ-7
- 1984 Jeep CJ-7
- 1983 Jeep CJ-7
- 1982 Jeep CJ-7
- 1981 Jeep CJ-7
- 1980 Jeep CJ-7
- 1979 Jeep CJ-7
- 1978 Jeep CJ-7
- 1977 Jeep CJ-7
- 1976 Jeep CJ-7
Jeep CJ-8
- 1985 Jeep CJ-8
- 1984 Jeep CJ-8
- 1983 Jeep CJ-8
- 1982 Jeep CJ-8
- 1981 Jeep CJ-8
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
OMIX Fuel Gauge & Temperature Gauge Kit Reviews
Mark L.
2/10/2024
They are fine but not as good as original
Richard F.
5/18/2022
Work fine
Gary A.
12/1/2022
A+
Questions
Leo S.
I purchased a set of the above gauges in the UK and having the following issues:
1) I am having 12 volt on the "A" terminal. Shouldn't this be 5 volt?
2) Terminals on the temperature seem to be reversed.
I would appreciate a clarification to these issues, please?
These are now 12 volt gauges, the factory used 5 volt. Please refer to these installation instructions for help with the new installation. : https://www.quadratec.com/sites/default/files/installation_instructions/8126919k.pdf
James M.
Do you check these before sending? I received a previously installed fuel gauge that failed bench testing. Output voltage is 12V, should be 5 V to the temp gauge. Terminals A and I are reversed and not per factory placement - or is it mismarked?
Please contact my customer service department for help regarding previous orders and incorrect shipments. These gauges are not the same voltage as original. They should run at 12 volts using the wiring diagram found on the cluster. see : https://www.quadratec.com/sites/default/files/installation_instructions/omix-cj-replacement-gauge-instructions_5.pdf
