Skip to main content
Home » Jeep Bumpers » Front Bumpers » Front Full Width Bumpers » Quadratec QRC Front Winch Ready Bumper
« Back to product
What is the rating on the D ring tabs. Will a 10,000 lb Warn winch fit? Thanks!
We do not currently list a load rating on our recovery points. Most 10,000lbs Warn winches should fit with no issues. Thanks for your inquiry.
What are the recommended fog lights? I have 2030 Rubicon w steel bumper. Thanks for assistance.
The factory fog lights for steel bumper will not fit. Our LED fog lamp kit will fit along with this model bumper. Quadratec LED Fog Lights Thanks for your inquiry.
Will this fit a Gladiator with the Mojave package and remote shock reservoirs?
Yes, it will fit that trim level and will not interfere with the Mojave Fox Shocks tucked behind the stock bumper. Thanks for your inquiry.
I have a front hitch receiver mounted on my gladiator. Will this bumper work with the receiver?
The lowest bumper surface will come below where the receiver is on Curt brand front tow bar for JT, so that model is not likely to fit without extreme modifications, which would void a warranty on the bumper. Thanks for your inquiry.
I'd like to buy a Badlands Apex 12,000 lbs winch w/synthetic rope for this bumper. Will it fit?
It appears a shared image of the bumper may have also used a badlands winch, though we have not specifically tested the model. Thanks for your inquiry.
I put this bumper on a 2021 gladiator rubicon. After Installing I saw that the factory front skid plate will not fit. The lower part of the winch plate is in the way. Is there a front skid plate that is compatible with this bumper, or do I have modify the original? It looks as if the original skid plate would need to be notched out.
Yes, the Quadratec Sway bar skid plate will fit along with the QRC bumper. See the link.Quadratec Sway Bar Skid for JL Thanks for your inquiry.
2021 jlu sport led fog lights have 3 20 screws I read other there LED light have 4 7mm bolts. With these lights still work. Also what skid plate is recommended
This bumper accepts both style fog lights. The Quadratec Sway Bar skid plate is able to fit JL models that are running this bumper. Thanks for your inquiry.
Does this come with all I will need to mount it and install the factory lights or do I need to buy something else
Yes. Note, that it will not allow fit of the fog lights that are equipped with metal Rubicon bumper. Thanks for your inquiry.
Does any body know the exact measurements for the full width Quadratic QRC front bumper #12057-0141. Not the shipping measurements.
70" long from end to end on the full length. 9" width for the main bumper width. At the D-ring mounting tabs it measures 11" in width. Thanks for your inquiry.
Will this fit a warn evo 10s winch?
It should. The EVO 10S sizing is the same as our Stealth winch which has been successfully fit in this bumper. Thanks for your inquiry.