Skip to main content
Home » Jeep Bumpers » Front Bumpers » Front Full Width Bumpers » Quadratec QRC Front Winch Ready Bumper
« Back to product
I have a 2020 Jeep Gladiator Overland, will the QRC Front winch ready bumper (full width) fit my model of jeep? I would also like to know if I will need to have different shocks put on to support the additional weight of the bumper? Thank you
The bumper will fit your Jeep. If the bumper causes more rake or nose dive than desired you could use some 3/4 coil spring spacers to level the front end. Thanks for your inquiry.
Will a Rough Country 9500-LB PRO SERIES WINCH SYNTHETIC ROPE fit this bumper?
It should, since it's dimensions are nearly identical to the size of our perfect fitting Stealth series winch. Thanks for your inquiry.
will this bumper fit X2O-10 Comp Gen2 Winch with Synthetic Line or XRC GEN3 12000 lbs Winch?
Yes, those winch varieties would be a successful fit in the QRC bumper. Thanks for your inquiry.
looking at Quadratec QRC Front Winch Ready Bumper for 18-22 Jeep Wrangler JL & Gladiator JT. i have a 2018 JL. i see on your picture it has two male bolts on either side and 2 holes. on my OEM bumber it has 4 bolts on each side. do i need to buy an additional bolt or is 2 on each side good? also, my state requires a front license plate. in addition to the StoNSho Removable Quick Release Front License Plate Bracket for Bumpers with a Roller or Hawse Fairleads. would i also need to buy Factor 55 00019 Hawse Fairlead 1.5?
No added bolts are required. Sto N Show license plate mounts have not been specifically tested, but hawse style mounts and D-ring attachment license plate mounts are also offered if the StoNSho is not just right. Thanks for your questions.
I have a 2021 80th Anniversary JLU, what LED fog lights will work with this bumper and is any additional wiring needed?
You could reuse your factory fog light, but if converting to an LED, our pair in the following link will fit along with this bumper and will not require additional wiring. Quadratec LED Fog Lamps Thanks for your inquiry.
Is this bumper compatible with the steel skid plate on the Gladiator Rubicon?
No, it is not. Thanks for your inquiry.
Hello, will a HF BADLAND ZXR 12,000 Lb. Winch work with this bumper?
Yes. Dimensionally the Badlands winch is very similar to our stealth winch case so it should be clear to mount. Thanks for your inquiry.
Are there specific auxiliary lights I can mount to the bar?
Clamp style light mounts brackets for 2"-2.5" tube sizing will likely fit without issues. See the following link.Tube Light Mounts 2-2.5" Thanks for your inquiry.
Will this work with Warn M8274?
No, sorry, the M-8274 is too large to fit in the winch recess area of the QRC bumper. Thanks for your inquiry.
Does this bumper work with a 2019 MOAB?
Yes, but your original fog lights are not a direct fit. Any OE fogs from plastic bumper groups either halogen or LED, will fit in the QRC. Our fog light upgrade is a direct fit. Here is a link to those. Quadratec LED Fogs