« Back to product
Andre G.
I have a Garvin Aventure roof rack that uses the same top hole and screw of the Mirror Mover. I have currently installed a mirror relocation kit from Quadratec on top of the roof rack bracket by using rubber shims for the bottom hole and screw. This pushes out the mirror bracket by about 5/8’’. If I were to do this with the Quadratec Automatic Billet Mirror Mover for power mirrors, would the additional distance from the body of the Jeep prevent the moving mechanism to work? I think not. My other option would be to get the Mirror Fill Plate with Bump for Automatic Mirror Movers to stick out an extra 5/8’’ by adding 5/8’’ of extra padding. I understand you can’t recommend modifying your products but do you see a reason why this should not work ?
The automatic mirror mover does not use the holes the Garvin Adventure Rack front support utilizes. They appear they would work with one another. If another relocation bracket is present, I would expect a conflict. If the automatic mirror mover is shimmed some outward, as long as the landing pad is also shimmed, it seems that the mechanism should function the same, but we have not tested the kit's usage with added windshield mounted accessories, light mounts, or racks. Sorry we cannot say with confidence, that it will work. Thanks for your inquiry.
Chris N.
I have two sets of doors (Core Doors and full size factory). Do you sell the "specialized" filler plate separately to avoid having to move the filler plates when swapping out doors?
The extra fill plate with landing pad for the mirrors can be viewed and purchased in the following link.Mirror Fill Plate with Bump for Automatic Mirror Movers Thanks for your inquiry.
John B.
I have a 2011 JK with power mirrors, but they aren't heated. will this mirror system work for me?
It cannot add the power heat feature for a Jeep that was not equipped with it from factory. While they will mount, the heat function would not work. Thanks for your inquiry.
Sean F.
Will the Quadratec Automatic Billet Mirrors work with a Smittybilt SRC roof rack?
No, they will not. They mount to the same area of the windshield support. Thanks for your inquiry.
Mike K.
What happened to the mirror movers that were for the power and heated mirrors? The install instructions do not mention this, even though it used to. Do you still offer this for the power and heated mirrors?
See the following model for the power heated. Power Heater Automatic Mirror Movers Thanks for your inquiry.
Chad P.
is there a non powered version of these?
Yes. This version is with standard Manual mirrors in the following link for part number 13125.0222. https://www.quadratec.com/p/quadratec/automatic-billet-aluminum-mirror-movers-wrangler-jk Thanks for your inquiry.
Skip W.
Is the PSG side mirror convex or straight?
Like OE objects may appear closer. Slight convex. Thanks for your inquiry.
Wayne F.
Where can I get another set of the bumpers for the doors?
https://www.quadratec.com/p/quadratec/door-fill-plates-bumpers-07-17-jeep-wrangler-jk-automatic-mirror-movers
Scott L.
Has there been any progress in updating the design to work for JL?
We are not working on these are the moment. The cowl where the mover would mount in completely different and not suitable for the current design. We may work on this in the future but it is on the current project list.
Kurt M.
Are the compatible with Bestop Core Doors?
These have not yet been tested with Bestop Core doors.