Borla 140828 2.5 in. Touring Climber Cat-Back Exhaust System for 18-24 Jeep Wrangler JL Unlimited with 3.6L
If you are planning on taking your Wrangler JL Unlimited on some of the tougher trails you might need a high clearance exhaust system to prevent damage to your exhaust. Borla brings their Touring Climber Cat-Back Exhaust to the JL line of Jeeps to give your rig the clearance it needs for those high angled climbs and declines. This exhaust tucks above the frame rails of your Jeep giving you plenty of ground clearance so no need to worry about damaging it on the trails. Made from T-304 stainless steel so you know it will hold up to whatever you come across on your adventures.
**Note: Will not fit 2.72:1 Select-Trac Full-Time 4WD System and eTorque mild hybrid system.
Design: Tucked up into the frame rails to give you maximum ground clearance for your off-road journeys. Designed to easily replace the stock Wrangler JLU 4-Door factory exhaust with no drilling or modifications required.
Touring Sound Provides a moderate, less aggressive sound when accelerating but does not drone on while maintaining highway speeds.
T-304 Stainless Steel: Made to stand up to the outdoor elements, resisting corrosion & backed by Borla's 1,000,000 Mile Warranty giving you a clean looking exhaust lasting you for years.
- Features: Moderately Aggressive Tone
- Color: Silver
- Material: T-304 Stainless Steel
- Type: High Clearance
- Shipping Weight: 35lb
Jeep Wrangler Unlimited 4-Door (JL)
- 2024 Jeep Wrangler Unlimited 4-Door (JL)
- 2023 Jeep Wrangler Unlimited 4-Door (JL)
- 2022 Jeep Wrangler Unlimited 4-Door (JL)
- 2021 Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Borla 2.5 in. Touring Climber Cat-Back Exhaust System Reviews
Price, sound
Install is easy. It's not very loud. Tail pipe tucks way up under the rear bumper. You don't have that big ugly stock muffler hanging across the back. It might give a little more torque and HP. If you look through the chamber of the muffler( Before you install it of course), you'll see daylight at the other end. So the exhaust flows straight through.
This exhaust will not fit a 2021 JLU(R) without fabrication. Mopar made a change to the undercarriage which prevents correct fitment. Quadratec and Borla are aware of this issue.
