The biggest hassle of owning a Wrangler is switching tops. Running the same top all year is just not an option. Make the change from your winter hardtop to your summer soft top a breeze with the Lange Originals Power Hoist-A-Top. Without the use of a hardtop hoist, it takes multiple people to remove a Jeep hardtop. However, with the assistance of one of Lange Original’s Hoist-A-Tops you can take the top off your Wrangler JL 4 Door alone with the push of a button. The balanced steel frame easily lifts and stores factory and aftermarket hardtops. With rubber coated hooks, you do not need to worry about damaging or modifying your hardtop. Lange Original’s rear Smart Hook™ ensures that the rear lift gate glass stays closed and out of the way for storage.
Minimum Ceiling Height: 7’
Maximum Ceiling Height: 25’
Stores and Protects: The Power Hoist-A-Top from Lange Originals features rubber coated hooks and foam padding to avoid marring or scratching the finish of your expensive factory or aftermarket hardtop. Unlike other lifts, the Hoist-A-Top can be used to store your top up in the air, and out of the way.
User Friendly and Versatile: If you can press a button you can operate the Power Hoist-A-Top. Easily winch the top up and down with the provided remote. This is kit is compatible with any garage, carport, barn, or shed with between 7’ and 25’ ceilings.
- Electric Drill with 3/8" Bit
- Phillips Screw Driver
- Adjustable Wrench
- Measuring Tape
- Pencil
- Hoist-A-Top
- Electric Winch
- Installation Hardware
- Style: Power Hoist
- Shipping Weight: 43lb
- Shipping Dimensions: 34in x 14in x 8in (L x W x H)
Jeep Wrangler Unlimited 4-Door (JL)
- 2026 Jeep Wrangler Unlimited 4-Door (JL)
- 2025 Jeep Wrangler Unlimited 4-Door (JL)
- 2024 Jeep Wrangler Unlimited 4-Door (JL)
- 2023 Jeep Wrangler Unlimited 4-Door (JL)
- 2022 Jeep Wrangler Unlimited 4-Door (JL)
- 2021 Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Lange Originals Power Hoist-a-Top Reviews
Looks like easy power up and down. The install looks pretty simple too.
Ease of use long term.
It's highly recommended.
Questions

Lange Originals recommends a ceiling mount configuration specifically for garages with ceilings over 9 feet tall. If your ceiling is between 7 and 9 feet, a wall-mount is usually preferred to maximize vertical clearance.
Mounting Requirements
Reinforcement: You should not bolt the motor directly into the drywall. The instructions specify mounting the power unit to a 2x6 wood base that spans at least two ceiling joists. This distributes the weight and torque of the motor safely across your garage's framing.
Orientation: * Perpendicular Joists: If your joists run perpendicular to the direction you park, you can span the 2x6 across them.
Parallel Joists: If they run parallel, you will need to install "cross-braced" 2x6 boards between the joists to create a solid mounting point for the motor bracket.
Plumb Line: You must ensure the motor is positioned so the cable drops in a straight vertical line to the balance blade on your hardtop to prevent sway and uneven lifting.




























