Teraflex 1155120 Rear 1/2" Coil Spacer Load Level Kit for 18-24 Jeep Wrangler JL
Quadratec Part #:
16190-1008
Teraflex Part #:
1155120
Description
The TeraFlex 0.5” Rear Spacer Load Leveling Kit for the Jeep Wrangler JL will increase the level of your coil spring height to help counterbalance the weight attributed to heavier aftermarket gear such as bumpers, a winch, a larger spare tire, or added weekend baggage and accessories.
Many states have laws that limit the maximum height of a lifted vehicle. Never exceed the legal height limit.
Popular Similar Items
Details
Note: Works w/ original or stock-length aftermarket shock absorbers.
- Features: 1/2 Inch
- Shipping Weight: 2lb
- Shipping Dimensions: 7in x 6in x 5in (L x W x H)
Jeep Wrangler 2-Door (JL)
- 2024 Jeep Wrangler 2-Door (JL)
- 2023 Jeep Wrangler 2-Door (JL)
- 2022 Jeep Wrangler 2-Door (JL)
- 2021 Jeep Wrangler 2-Door (JL)
- 2020 Jeep Wrangler 2-Door (JL)
- 2019 Jeep Wrangler 2-Door (JL)
- 2018 Jeep Wrangler 2-Door (JL)
Jeep Wrangler Unlimited 4-Door (JL)
- 2024 Jeep Wrangler Unlimited 4-Door (JL)
- 2023 Jeep Wrangler Unlimited 4-Door (JL)
- 2022 Jeep Wrangler Unlimited 4-Door (JL)
- 2021 Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Teraflex Rear 1/2" Coil Spacer Load Level Kit Reviews
GREGORY D.
8/10/2022
Awesome simple install. I stacked 2 for a full 1inch lift in my Rubicon which came from the factory with a reverse rake.
Scott H.
6/25/2022
Level out stance
Stephane B.
12/6/2020
This is exactly what I needed. I mounted two kits (one on top of the other) to get a total of 1" which compensated for the overweight of my "LoD bumper" and the sagging of the rear of my Jeep JL.
Questions
Ron D.
Are they stackable or do they offer a 1 inch rear spacer For the JL ??
They are stackable
Abdullah A.
Could I put two of them in each right and left rear sides to make it 1 inch in each?
Yes, these can be stacked, but take into consideration the length of your shocks. These are intended to correct sag and trim when loaded with heavy accessories such as racks gear. If you are using to achieve lift over the stock height you may run short on the shocks.
