Reviews for Quadratec Adventure Mirrors for 76-25 Jeep Wrangler JL, JK, TJ, YJ, CJ & Gladiator JT

While these are very easy to install, they vibrate so much and don’t stay in place for long. They were very tight and secure and still the image in the mirror is so wobbly. Not many options when the doors are off, better than nothing but still disappointing.

Feels like I am going to break the brackets because I have to tighten so much to keep the wind, at speed, from turning the mirrors. Vibration almost renders these useless.

These units use plastic washers to tighten, the mirrors constantly have to be re-adjusted as the plastic washers get smashed if you over tighten them.

For the price and the need, being street legal, these are ok. But they do not stay in place when traveling above 35 miles per hour. Shaking is crazy.

can't get them to stay in position any thing over 60 mph

Very easy to install, but if you go over 50mph they tend to move in as the wind blows by. I have tightened them several times. I’m afraid that I’m going to break or strip the threads by over tightening them.

They do move inward at high speeds. I bought some lock washers and that helped somewhat but the require constant futzing while driving.

Easy to put on but difficult to get to stay in place at higher speeds.

if you just want a cheap mirror to be legal than this is ok. However, it wont hold in place after about 30 mph.

The one Timon point to the Jeep slips and at highway speeds the mirrors fold into the Jeep constantly needing to be re adjusted. The rod that old that holds the mirror to the Jeep is pressed together at the bolt point instead of one piece of steel rod with the threads die cut into it. So the bolt slips out of the rod when you tighten it down.